Perfect for Ponds or Ditch Banks as well as Pasture or Hay

·· Cuts at angles from 90º up to 60º down

·· Works at speeds up to 12-15 mph

·· Does not throw rocks or debris

·· Can cut through brush up to 1 ½ in. diameter

·· Cuts heavy, wet or downed grass with

scissors-cut leaving hay to dry evenly

·· Raise/lower blades hydraulically

·· Needs minimum of 15 HP to PTO

·· Weight approximately 525 lbs

·· Mounts to the three-point hitch, Category 1 or 2;

    540 RPM PTO

·· 6 mo. limited warranty

  Unlike the old sickle bar mowers, both sections and guards move in opposing directions, to prevent choking

Available in two cutting widths:  7-feet and 8-feet  

Tough, durable, safe and flexible

For Hay Tedder and Rake please click here 

Twin-Blade Mower Additional Information

Preset safety release device.  For very rough conditions where it is necessary to increase or decrease the pressure by adjusting the nut indicated by the arrow.	Belt tightening device. The belt tension must be adjusted in the first 24 working hours. To increase the tension, adjust the nut indicated by the arrow.

 

 

Please either use the Table of Contents or the Back Button to navigate. Back to top of pageIf you do not see this page as one page in a site, please click here. Thanks.